What Is Elastane? Elastane vs Spandex vs Lycra Explained
What elastane is made of, why elastane, spandex and Lycra are the same fiber under different names, how much elastane clothing uses, two-way vs four-way stretch, shrinkage, breathability, production issues and how to specify stretch in a tech pack.
Alex Morgan
Senior Sourcing Specialist Β· SourceBridge
The Short Answer
Elastane and spandex are the same fiber. Elastane is the name used in most of Europe and in international fiber standards. Spandex is the generic name used in the United States and Canada. Lycra is a brand name for one company's elastane fiber, in the same way that Tencel is a brand name for lyocell. All three describe a synthetic fiber made from segmented polyurethane that can stretch to several times its own length and snap back.
Elastane is almost never used on its own. It is blended in small amounts with cotton, polyester, nylon, viscose, modal or wool to give fabric stretch and, more importantly, recovery: the ability to return to shape after it has been stretched. A T-shirt jersey might carry a few percent, a pair of stretch jeans one to three percent, and leggings or swimwear far more.
For a brand, the questions that matter are how much elastane the fabric needs, how it is built into the yarn or knit, how it will behave in washing, dyeing and printing, and how to write it on the specification and the care label. This guide covers each of those.
What Elastane Is Made Of
Elastane is a manufactured fiber made from a long-chain polymer that is at least 85% segmented polyurethane. That definition is close to the one used for the generic name spandex in the US fiber-labeling rules. The polymer has two kinds of segments: soft, flexible segments that uncoil when the fiber is pulled, and hard segments that hold the chains together and pull them back when the tension is released. That structure is what gives elastane its stretch and recovery.
Most elastane is made by dry spinning. The polymer is dissolved in a solvent, pushed through a spinneret into hot air, and the solvent evaporates to leave fine filaments, which are usually fused together into a single monofilament-like yarn. The fiber was developed at DuPont in the late 1950s and was sold under the Lycra name. Today elastane is made by a number of producers in Asia, Europe and the Americas, under many brand names as well as unbranded.
Elastane vs Spandex vs Lycra
The three names cause most of the confusion about this fiber, so it is worth being precise.
So "elastane vs spandex" is a question of region, not of performance. "Lycra vs spandex" is a question of brand. A factory may describe the same fabric as cotton elastane in its own documents and you may label it cotton spandex for the US market. Write both on the specification if there is any doubt, and never call a fabric Lycra on a hangtag or listing unless the supplier can document that the fiber is genuine Lycra.
How Elastane Behaves
Elastane fibers can typically stretch to around five to seven times their original length before breaking, and they recover almost completely when released. In a finished fabric, the stretch you feel is much lower, because the elastane is only a small part of the blend and the fabric structure limits how far it can be pulled.
Its main properties as a fiber:
How Elastane Is Built into Yarn and Fabric
Elastane is rarely knitted or woven bare on its own. It is combined with a companion fiber in one of several ways, and the method affects hand feel, cost and how the fabric performs.
The construction also matters. Knits stretch more than wovens even without elastane, because of their loop structure. The guide to knit vs woven fabric covers that difference.
Two-Way Stretch vs Four-Way Stretch
Stretch fabrics are often described as two-way or four-way stretch, and the terms are used loosely.
For a specification, the words are less useful than measured values. Ask the factory or fabric mill for stretch and recovery results in both directions, measured to a named test method.
How Much Elastane Is in Clothing
The amount of elastane depends on the product and the construction. Typical ranges seen in apparel, which vary by mill and design:
More elastane is not automatically better. It raises fabric cost, makes the fabric heavier and harder to cut and sew, adds heat sensitivity in dyeing and finishing, and can make a garment feel tight or warm. The right figure is the lowest one that gives the fit and recovery the product needs, confirmed on a sample.
Spandex vs Polyester and Nylon
Spandex is not an alternative to polyester or nylon. It is usually blended with them.
Does Spandex Shrink?
Elastane itself does not shrink in the way cotton does, but fabrics that contain it can shrink or grow if they have not been properly heat-set. During knitting and finishing, the elastane is held under tension. Heat-setting stabilizes it at the intended width and length. If that step is incomplete, the fabric can draw in when it is washed or tumble-dried, especially at high temperatures.
High dryer heat also weakens elastane over time, which shows up as lost recovery rather than shrinkage. That is why care labels for stretch garments usually recommend cool or warm washing, low or no tumble drying and no high-heat ironing. Ask the factory for dimensional stability results after washing, and for the pre-shrinking or compacting steps it uses on the companion fiber.
Is Spandex Breathable?
Elastane absorbs very little moisture, so on its own it is not a breathable fiber in the way cotton is. In most garments, though, it is a small share of the fabric, and breathability depends far more on the main fiber and on how open the knit or weave is. A cotton jersey with 5% elastane still feels like cotton. A dense nylon and spandex compression fabric with 25% elastane will feel warmer, and activewear brands usually address that with moisture-wicking yarns, mesh panels and open knit structures.
Production Issues with Elastane Fabrics
Stretch fabrics are harder to produce well. The problems a brand should plan for:
How to Specify Elastane in a Tech Pack
A factory needs more than "with stretch" to quote a stretch garment. Include:
Our guide to what a tech pack is covers the rest of the document.
Elastane and Minimum Order Quantity
Adding elastane does not set the minimum order quantity on its own. What matters is whether the fabric exists as a stock or ready-to-dye fabric, how many colors you want, and whether you need a specific weight, elastane percentage, branded fiber or special grade. A stock cotton elastane jersey in a standard color is easier to source at low quantities than a custom four-way stretch nylon blend in a brand color, which is more likely to need its own fabric run with the mill's own minimum.
Sourcing Stretch Garments in Turkey
Turkey has a large spinning, knitting, weaving, dyeing and finishing base serving apparel brands, and its garment manufacturers regularly produce T-shirts, underwear, loungewear, denim, activewear and swimwear that use elastane blends. Which stretch fabrics a factory can source, whether branded or special-grade elastane is available, and what test results come with the fabric all vary by factory. Confirm them at the quote stage.
SourceBridge responds to a textile brief within 24 hours with options from 2β3 pre-vetted Turkish factories. The published starting point for textiles is 300 units per style. Samples typically take 7β14 days, plus 5β7 days for international courier, and production typically runs 4β8 weeks depending on product complexity, with a pre-shipment inspection against the approved sample before goods leave the factory. Our guides on how to find a clothing manufacturer and clothing manufacturers for startups cover the steps before and after the specification.
FAQ: Elastane, Spandex and Lycra
Is elastane the same as spandex?
Yes. Elastane and spandex are two names for the same fiber. Elastane is used in Europe and in most international standards. Spandex is the generic name used in the United States and Canada.
What is the difference between Lycra and spandex?
Lycra is a brand of spandex. It is a registered trademark of The LYCRA Company. Spandex and elastane are the generic names for the fiber, whoever makes it.
What is spandex made of?
A synthetic polymer that is at least 85% segmented polyurethane. Soft segments in the polymer let it stretch, and hard segments pull it back. Most spandex is made by dissolving the polymer and dry spinning it into fine filaments.
Is elastane natural or synthetic?
Synthetic. It is made from petrochemical raw materials and does not biodegrade like cotton or wool.
Why is elastane added to clothing?
To give stretch and recovery. Even a small percentage helps a garment fit closely, move with the body and return to shape instead of bagging at the knees, cuffs and neckline.
How much elastane is normal?
It depends on the product. Stretch tees often have around 3% to 8%, stretch denim around 1% to 3%, and leggings and swimwear around 10% to 25%. The right amount is the lowest that gives the fit and recovery the product needs.
Does spandex shrink?
Elastane fabrics can shrink if they were not properly heat-set, and high dryer heat weakens elastane over time. Washing cool and drying on low or no heat keeps stretch garments in shape longer.
Is spandex breathable?
The fiber absorbs very little moisture. In most garments it is a small share of the fabric, so breathability depends mainly on the main fiber and the openness of the knit.
What does four-way stretch mean?
The fabric stretches both across its width and along its length. Two-way stretch usually means stretch in one direction, most often across the width.
Why does chlorine damage swimwear?
Standard elastane breaks down in chlorinated water. Swimwear meant for pools uses chlorine-resistant elastane grades or fabrics that rely more on polyester.
Which label name should I use for the US market?
Spandex. US fiber-content labels use the generic fiber names listed in the FTC's textile rules, and spandex is the listed name. Check the current FTC guidance before printing labels.
Does elastane change the minimum order quantity?
Not by itself. Stock fabric availability, color count, weight and any branded or special-grade fiber matter more. Custom stretch blends are more likely to need a dedicated fabric run.
Written by Alex Morgan
Senior Sourcing Specialist Β· SourceBridge
Alex has 10+ years of experience connecting American brands with top manufacturers in Turkey, China, and the USA. He specializes in private label product sourcing, Amazon FBA strategy, and helping entrepreneurs launch profitable brands with the right factory partners.
Sourcing Services for This Category
Related Sourcing Guides
- Textile & Apparel SourcingWhat Is Pima Cotton? Pima vs Supima, Egyptian and Regular CottonWhat Pima cotton is, what extra-long staple means, how Pima compares with regular, Supima and Egyptian cotton, which products benefit, and how to specify and verify a Pima claim with a factory.
- Textile & Apparel SourcingPolyester vs Cotton: Differences, Blends and Which to ChooseHow polyester and cotton compare on breathability, shrinkage, stretch, pilling, color, printing and cost, what polyester is made of, how CVC, 60/40, 50/50 and tri-blend fabrics behave, and how to specify fiber content for a factory.
- Textile & Apparel SourcingHow to Source Private Label Clothing from TurkeyLearn how to source private label clothing from Turkey with this step-by-step guide for American brands and Amazon sellers. Find trusted manufacturers fast.
- Textile & Apparel SourcingSource Private Label Clothing from Turkey: Complete GuideLearn how to source private label clothing from Turkey in 2026 β MOQs, lead times, certifications, factories, and insider tips from a 12-year sourcing veteran.
Ready to Source This Product?
Chat with Alex and get a free sourcing quote within 24 hours.